English
Pусский
News
Home / News / Industry News / What is the meaning of the single screw extruder?

What is the meaning of the single screw extruder?

Publish Time: 2022-01-06     Origin: Site


The extrusion system of a single screw extruder includes a screw, a cylinder, a funnel, a head, and a nozzle. The plastic is plasticized by the extrusion system into a uniform melt and is continuous under the resulting pressure through the screw of the extruder head.

  • What is the relevant information about single screw extruders?

  • How to improve the product quality of the single screw extruder?

  • What role does the heating and cooling system play in the single screw extruder?

What is the relevant information about single screw extruders?

Each product type in the production line for single screw extruders has its operating characteristics. Only if you know their operating characteristics can you fully measure the efficiency of the machine.


Slug extruder's one of the guys. Record the operating points of single screw extruders and use single screw extruders correctly and sensibly.


The use of a single screw extruder includes several connections such as machine setup, adjustment, test run, operation, maintenance, and repair. Its use has the common characteristics of general machines, mainly in the drive engine and in the speed reduction device.


The working system of the single screw extruder, however, is the extrusion system, which has unique characteristics. When using the single screw extruder, pay particular attention to its properties.


How to improve the product quality of the single screw extruder?

1. About the extrusion product quality of the single screw extruder:

Injection extruders must conform to the raw material formula and process, the product size must correspond to the extrusion equipment and the raw materials must be sufficiently mixed and plasticized to ensure stable extrusion pressure and product quality.

2. Improve extrusion efficiency:

It is related to the selection of the single screw extruder, the screw structure, and the material properties, which are relative and must be considered comprehensively. Simple method, you can choose a larger extruder, the nozzle is opened into a nozzle and several forms.


What role does the heating and cooling system play in the single screw extruder?

The heating and cooling system of the inlet extruder consists of a heating device and a cooling device. It is a necessary condition for the smooth running of the extrusion process. The heater and cooling system shall ensure that the polymer material is melted and plasticized and that the temperature conditions during the molding process meet the process requirement.


The cooling system is generally installed in the cylinder, in the screw, and the bottom of the funnel of the inlet extruder. The cylinder cooling may be water-cooled or air-cooled. In general, small and medium extruder air cooling is used; Large series single screw extruders usually use water cooling or a combination of both. The main use of sludge cooling is a central water cooling system, the purpose of which is to increase the rate of solidification of the material, to stabilize the volume of discharges, and, at the same time, to improve product quality. The cooling system at the bottom of the funnel serves mainly to enhance the conveying effect of solids and to prevent the material particles from sticking due to the increase in temperature, blocking the material opening and impairing the supply. In general, in the case of extruders with screw diameters over 90 mm and fast-running screw extruders, a cooling device shall be installed at the bottom of the funnel.


Nanjing JlEYA has worked for many years to meet every customers’ need for single screw extruder. Just connect them.


 Get In Touch
No.337 East Zhening Road, Zhetang Town,
 Lishui District, Nanjing city, Jiangsu Province, PR China
+86-025-57248891 
+86-15358131346
+86-025-57248499
 Jieya Extrusion